Now you can choose some designer roller shutters for your property and these shutters can provide you better longevity also. These shutters are rust-resistant and these shutters do not get affected by wear and tears. Apart from that, these shutters can block the sun heat and keep your rooms cool. It will reduce your power consumption bills, and you can operate these shutters with remote control. So, there are lots of advantages of these roller shutters and now you can buy these shutters from online stores.
What are the attractive features of the roller shutters?
- Cheek plate: The roller holding the curtain in place is supported by two load-bearing cheek plates or end plates. The cheek plates are secured to the building structure using adequate fixings to take the full load of the shutter.
- Flag post: The flag post is a result of the cheek plate welded to a vertical angle or directly to the top of the guide. The vertical angle of the flag post is also secured to the building structure to give additional support and aid in the installation of the shutter.
- Roller assembly: The shutter curtain is held in place by a full width roller, which is supported at each end by the cheek plates. The roller comprises of a steel tube with a tubular motor fitted at one end and a shaft at the opposite end.
- Tubular Motor: A tubular motor is fitted into the shutter's overhead barrel assembly. Protruding from the barrel is the motor head which incorporates a manual override eye, the electrical wire feed, and a pair of limit switches to control the maximum travel distance of the shutter curtain.
- Safety Brake: This part of the roller shutter controls its descent if there happens to be a failure in the motor. The safety brake will activate and bring the shutter to a complete halt if there is a malfunction. The brake, if activated, will require resetting or in some cases, replacement.
- U- Cup or Bearing: When a safety brake is not fitted, a U-Cup or Bearing is fitted to the cheek plate to support the barrel.
- Guides: The curtain runs up and down through two side guides. These are 'u' shape in design.
- Curtain: The material that shuts off the area between the guides. This is generally made of steel or aluminum lath that interlock together. Tube and Link grilles are held together by horizontally-positioned rods.
- Bottom Rail: The final bottom section of the curtain and is often 'T' shaped or 'L' shaped to give additional rigidity.
- Canopy Cover: This part of the roller is also known as the hood. The fitting is generally optional. This part of the shutter is created from galvanized steel and supplied folded, to wrap around the cheek plates, protecting the curtain and barrel from the rain and dust.
- Finishes: Aluminum roller shutters can be anodized with a silver looking finish or can be powder coated with a wide choice of other colors available on the market.
If we are unable to install our roller shutters, we can have them installed by professionals. So, if you buy your roller shutters from a reputable company, you can get an installation quote. If you have them delivered to you, a good handyman can install them for you.